Buck Builds Peterbilt Semi Truck
Please read before purchasing.
Shipped Raw. Unpainted and unassembled. Truck is just under 6” long.
Sanding required before paint. This kit is not recommended for beginners.
INCLUDED - adjustable suspension chassis- Cab- Hood- Visor- Interior- 2 air cleaners- 2 mirrors- Rear fenders/chassis cover- Fifth Wheel Hitch- 4 rear, 2 front wheels and tires- 3 metal axles and clear plastic to make windows.
*Use caution while handling the mirrors. They are very fragile.*
Stacks and pipe screen for grille NOT INCLUDED.
You will need 5/32x.014 brass or aluminum tube from K&S precision metals. Aluminum part #8103 or #5103 if you want a multi pack with 3 tubes I got a pack of 1.25” pipe screens off of Amazon to use as grille mesh.
I made a video to go with this kit. It may take a couple days to get up but be sure to check it out as most FAQs are answered in the video
Disclaimer. The Rear fenders/bed cover may have a slight warp which should go away once glued to the chassis. In test printing, 3 out of 5 did not warp at all however 2had a slight warp after curing. It does not effect the fenders. Just the chassis cover.
Pictured are the Kit you will receive and a finished and painted example. PAINTED TRUCKS NOT INCLUDED.
These trucks are 1/64 scale but they are still very big compared to the normal kits. Please be patient and allow a couple days for us to make and send your order. Thanks!
Please read before purchasing.
Shipped Raw. Unpainted and unassembled. Truck is just under 6” long.
Sanding required before paint. This kit is not recommended for beginners.
INCLUDED - adjustable suspension chassis- Cab- Hood- Visor- Interior- 2 air cleaners- 2 mirrors- Rear fenders/chassis cover- Fifth Wheel Hitch- 4 rear, 2 front wheels and tires- 3 metal axles and clear plastic to make windows.
*Use caution while handling the mirrors. They are very fragile.*
Stacks and pipe screen for grille NOT INCLUDED.
You will need 5/32x.014 brass or aluminum tube from K&S precision metals. Aluminum part #8103 or #5103 if you want a multi pack with 3 tubes I got a pack of 1.25” pipe screens off of Amazon to use as grille mesh.
I made a video to go with this kit. It may take a couple days to get up but be sure to check it out as most FAQs are answered in the video
Disclaimer. The Rear fenders/bed cover may have a slight warp which should go away once glued to the chassis. In test printing, 3 out of 5 did not warp at all however 2had a slight warp after curing. It does not effect the fenders. Just the chassis cover.
Pictured are the Kit you will receive and a finished and painted example. PAINTED TRUCKS NOT INCLUDED.
These trucks are 1/64 scale but they are still very big compared to the normal kits. Please be patient and allow a couple days for us to make and send your order. Thanks!